QNAP NAS Data Recovery Service | All Models | RAID Reconstruction Experts

QNAP NAS Data Recovery in Clean Room Environment

When your QNAP NAS fails, our certified engineers can recover data from all models including TS-x31, TS-x53, TVS-x72, and enterprise systems. Using PC-3000 and UFS Explorer in our ISO Class 5 clean room, we specialize in complex RAID recoveries from:

  • Failed RAID 5/6 arrays
  • Corrupted QTS volumes
  • Encrypted NAS units
  • Water-damaged devices
  • Controller failures
  • Multiple drive failures

QNAP Troubleshooting Steps (Before Recovery)

Scenario 1: NAS Not Powering On

  1. Check power supply with multimeter
  2. Try different power cable/outlet
  3. Remove all drives and attempt boot
  4. Inspect for swollen capacitors

Scenario 2: RAID Shows Degraded

  1. Note which drive(s) are marked failed
  2. DO NOT rebuild array - power off immediately
  3. Label drives by original bay positions
  4. Check SMART data on each drive

Scenario 3: Data Inaccessible

  1. Attempt connection via SSH if possible
  2. Check disk management in QTS
  3. Look for foreign volume warnings
  4. Avoid factory reset at all costs

Critical Warning: Continuing to power on a failing NAS may cause permanent data loss. If these steps don't resolve your issue, contact our specialists immediately.

Our QNAP Recovery Process

Stage 1: Evaluation

  • Free initial consultation
  • £99 + VAT diagnostic fee
  • RAID parameter analysis
  • Recovery feasibility report

Stage 2: Recovery

  • Drive imaging in clean room
  • RAID reconstruction
  • File system repair
  • Data verification

Success-Based Pricing: Only £750 + VAT if recovery is successful. No hidden fees.

Emergency QNAP Recovery Service

London Lab

Address:
80 Willow Walk, Unit 1
London SE1 5SY
(24/7 monitored facility)

National Coverage

Free Secure Courier:
- Temperature-controlled transport
- Encrypted tracking system
- Business-critical priority service

Creative IT - QNAP Certified Data Recovery | 24/7 Emergency Service | Since 2004